CÔNG TY TNHH TRAINOCATE VIỆT NAM
MSEXC: Implementing Microsoft Exchange on NetApp Storage Systems

MSEXC: Implementing Microsoft Exchange on NetApp Storage Systems

MSEXC: Implementing Microsoft Exchange on NetApp Storage Systems

Overview

Duration: 3.0 days

In this certification & training course you will learn how to optimize Microsoft® Exchange Server 2010 in a NetApp® storage environment. Through lecture and hands-on labs you will learn architecture planning, data migration, backup and restore, disaster recovery, clustering and troubleshooting. By the end of this course, you will be able to leverage the power of NetApp technology with Microsoft Exchange Server 2010.

Objectives

By the end of this course, you will be able to:

  • Describe the benefits of running Exchange 2010 on a NetApp storage system
  • Plan, implement, and manage Exchange 2010 solutions on NetApp storage systems
  • Describe how to back up and restore Exchange data that is stored on NetApp storage systems
  • Summarize the benefits of deploying an Exchange 2010 solution on Data ONTAP operating in Cluster-Mode
  • Prepare Exchange servers and NetApp storage systems for an Exchange 2010 deployment
  • Use SnapManager for Microsoft Exchange (SME) to back up, verify, and restore Exchange data
  • Configure Exchange 2010 disaster recovery by using NetApp SnapMirror software
  • Perform a single mailbox recovery by using NetApp Single Mailbox Recovery (SMBR)
  • Use NetApp SnapVault software to protect Exchange 2010 data
  • Recognize and resolve common configuration issues for Exchange 2010 deployments on NetApp storage systems

Content

Module 1 Exchange 2010 Architectures and NetApp Storage Concepts

  • Describe the main architecture and components of an Exchange deployment
  • List the key differences that are introduced with Exchange Server 2010
  • Explain the NetApp storage concepts and functionality that are most relevant to Exchange 2010 deployments
  • Utilize your classroom lab equipment to complete student lab exercises

Module 2 Exchange 2010 Solution Design, NetApp Storage Planning and Sizing

  • Explain typical deployment scenarios for Exchange 2010
  • Summarize the main factors to consider when you plan NetApp storage for Exchange deployments
  • Use the Microsoft Exchange storage calculator to help you to plan for an Exchange 2010 deployment on NetApp

Module 3 Preparing for an Exchange 2010 Deployment on NetApp Storage

  • Describe the installation process for Exchange Server 2010
  • Prepare and configure the NetApp storage systems and Exchange servers
  • Install and configure SnapDrive for Windows
  • Install and configure SnapManager for Microsoft Exchange (SME)
  • Plan for an Exchange Server upgrade or migration from an Exchange implementation

Module 4 Exchange 2010 and NetApp Data ONTAP Operating in Cluster-Mode

  • Explain basic terminology for Data ONTAP operating in Cluster-Mode
  • Identify the similarities and differences between Data ONTAP operating in 7-Mode and operating in Cluster-Mode
  • List the main benefits of utilizing Data ONTAP operating in Cluster-Mode

Module 5 Backing Up and Restoring Exchange 2010 on NetApp Storage

  • Describe the backup setting options that are available with SnapManager for Microsoft Exchange (SME)
  • Use SME to perform an Exchange 2010 backup
  • Describe the recovery setting options that are available with SME
  • Use SME to perform an Exchange 2010 restore
  • Describe some of the alternate backup solutions that are available for Exchange 2010 deployments on NetApp storage

Module 6 Exchange 2010 and SnapMirror Software

  • Describe SnapMirror functionality within a Microsoft Exchange deployment
  • Use SnapMirror software for disaster recovery of Exchange 2010
  • Explain how the failover and failback processes work with SnapMirror software

Module 7 Exchange 2010 and SnapVault Software

  • Describe SnapVault functionality within a Microsoft Exchange deployment
  • Use SnapVault to archive and restore Exchange 2010 data

Module 8 NetApp Single Mailbox Recovery

  • Explain the features, functionality, and benefits of Single Mailbox Recovery ( SMBR) for an Exchange deployment
  • Use SMBR to perform a single mailbox recovery

Module 9 Troubleshooting Exchange 2010 and Issues with SnapManager for Exchange

  • Troubleshoot common issues for Exchange 2010 deployments on NetApp storage
  • Explain viable solutions for common issues for Exchange 2010 deployments on NetApp storage

Lab Exercises

  • Lab 1-1 View the Exchange 2010 server implementation
  • Lab 1-2 View the Exchange 2010 Mailboxes
  • Lab 1-3 Send an email message
  • Lab 1-4 Create a two-member DAG
  • Lab 2-1 Use the IMT
  • Lab 2-2 Use the Microsoft sizing tool
  • Lab 2-3 Calculate aggregate, volume and LUN layout
  • Lab 3-1 Prepare for iSCSI connectivity between SnapDrive and storage systems
  • Lab 3-2 (Optional) Allow OnCommand System Manager firewall access
  • Lab 3-3 Install and configure SnapDrive for Windows
  • Lab 3-4 Install SnapManager for Exchange on MB1
  • Lab 3-5 Verify settings for primary and secondary aggregates
  • Lab 3-6 Create volumes on the primary storage system
  • Lab 3-7 Create Qtrees to contain LUNs
  • Lab 3-8 Use SnapDrive to create LUNs to contain Microsoft Exchange data
  • Lab 3-9 Move MB1 Mailbox Server data to NetApp storage
  • Lab 3-10 Move MB2 Mailbox Server data to NetApp storage (repeat task 6)
  • Lab 4-1 Start Microsoft LoadGen
  • Lab 4-2 Perform a VOL move using OnCommand System Manager
  • Lab 4-3 Perform Rapid Reseed using PowerShell script
  • Lab 5-1 Configure the Database Availability Group (DAG)
  • Lab 5-2 Back up the database using SnapManager for Exchange
  • Lab 5-3 Restore Microsoft Exchange data using SnapManager for Exchange
  • Lab 6-1 Setting up SnapMirror relationships
  • Lab 6-2 Update a SnapMirror destination using SnapDrive for Windows
  • Lab 6-3 Set up SnapMirror automatic updates using SnapManager for Exchange
  • Lab 7-1 Using SnapManager to create a Protection Manager Datasets
  • Lab 7-2 Adding login credentials and granting SnapVault host access
  • Lab 7-3 Adding a resource pool to Protection Manager
  • Lab 7-4 Scheduling backup operations
  • Lab 7-5 Using SnapManager to create a Protection Manager Dataset
  • Lab 8-1 Install Single Mailbox Recovery
  • Lab 8-2 Delete Exchange mailbox items
  • Lab 8-3 Connect a drive to a SnapVault backup to access an .edb archive
  • Lab 8-4 Restore Exchange mailbox items
  • Lab 8-5 Using the Find tool
  • Lab 9-1 Review a number of common root causes
  • Lab 9-2 Locate the SnapManager for Exchange operation reports

Audience

The target audience is customers, systems engineers, and professional services engineers.

Prerequisites

The following pre-requisites or equivalent knowledge are required for this course:

  • NA-D7ADM
  • Microsoft Course 10135: Configuring, Managing and Troubleshooting Microsoft Exchange Server 2010

Certification

NS0-183 - NetApp Certified Storage Installation Engineer

Lịch khai giảng

Form đăng ký

Bằng cách nhấn nút "ĐĂNG KÝ", tôi hoàn toàn đồng ý với Chính sách quyền riêng tư

Các khóa đào tạo NetApp khác

IMPVMWAR: Implementing VMware vSphere on ONTAP 9.9

In this course, you learn how to manage VMware vSphere virtualization solutions with NetApp ONTAP data management software. You learn how to use NetApp ONTAP tools for VMware vSphere and other ONTAP solutions to deploy, manage, and protect the VMware virtual infrastructure on ONTAP based storage systems in both SAN and NAS environments. The course introduces you to the ONTAP tools Virtual Storage Console (VSC), NetApp VMware vSphere API for Storage Awareness (VASA) Provider, and Storage Replication Adapter (SRA). You also learn how to use the NetApp SnapCenter Plug-in for VMware vSphere to configure backup and recovery.
2.0 ngày

VVNA: VMware vSphere on NetApp

In this course you will learn different methods to implement VMware vSphere 6.7u3 on NetApp ONTAP 9.6. The course provides a quick update on the current ONTAP and VMware versions, introduce the current tools to manage a VMware virtual infrastructure (VSC 9.6) and describe and provide practical exercises to provision datastores and storage for guest VMs with various protocols. It also points administrators to methods to back up their virtual infrastructure according to best practices and discusses methods and tools to manage and monitor for health and performance.
5.0 ngày

IMPMSHV: Implementing Microsoft Hyper-V on Data ONTAP

Implementing Microsoft Hyper-V on Data ONTAP (IMPMSHV) is a 2 day instructor led course where you will learn how to design and implement virtualization solutions on NetApp® storage systems using Microsoft Hyper-V. You will also discover how to deploy the Microsoft Windows Server 2012 R2 virtual infrastructure on Data ONTAP storage.
2.0 ngày

PROVMVSP: Protecting VMware vSphere

This course describes the deployment of the SnapCenter Plug-in for VMware vSphere. In this course, you learn about the features of the plug-in and learn how to install and perform initial configuration of the plug-in. You also use NetApp SnapCenter software to learn how to protect and restore VMware virtual machines (VMs) and datastores. Through instructor-led presentations and web-based courseware, you gain knowledge about these topics. Hands-on exercises provide you with experience in performing these tasks.
1.0 ngày

SFSA: Element Software Administration

This two-day, instructor-led course uses lecture and hands-on exercises to teach basic administration of a NetApp Element software cluster in a SolidFire system. You configure and maintain a cluster. You practice working with Element software features, using the Element CLI and web UI to manage storage and network resources.
2.0 ngày

SANADM: ONTAP SAN Administration v9.8

In this certification & training course, you learn about configuring ONTAP 9 Data Management Software for a SAN environment. The course provides information about block-level protocols, including FC, FCoE, and iSCSI on Microsoft Windows Server, Linux, and VMware ESXi host operating systems. The course also discusses best practices for managing SAN storage provisioning, protocols, hosts, availability, and data protection. An introduction to NVMe over Fabrics (NVMe-oF) is provided. The course focuses on ONTAP 9.0 functionality and includes lecture and a hands-on exercise environment.
2.0 ngày

SANIMP: ONTAP SAN Implementation v9.8

In this certification & training course you will learn the installation process for ONTAP 9 Data Management Software for a SAN environment. The course provides information about block-level protocols, including FC, FCoE, NVMe, and iSCSI, on Microsoft Windows Server, Linux and VMware ESXi host operating systems. The learning will be reinforced through hands-on guided labs. The course materials include a lab workbook that will serve as an on-the-job reference guide.
3.0 ngày

OCIIMP: OnCommand Insight: Implementation

In this lecture-based and lab-based certification & training course, you learn how to install and configure OnCommand Insight. This course builds on the contents of the “OnCommand Insight: Fundamentals” course. This course demonstrates how to successfully deploy the components of OnCommand Insight. To learn how to use OnCommand Insight for daily operations, attend the “OnCommand Insight: Intelligent Operations” course. To learn how to use the reporting capabilities of the OnCommand Insight data warehouse, attend the “OnCommand Insight: Business Insights” course.
2.0 ngày

AOCMCDOT: ONTAP Administration of Active IQ Unified Manager

Through brief lectures, exercises, and classroom discussion you discover how to deploy and maintain NetApp® Active IQ®Unified Manager. You also learn how the performance-management features of Unified Manager provide a unified approach to storage management that reduces complexity. This course can be delivered in a traditional classroom or a virtual classroom.
2.0 ngày

OCIBI: OnCommand Insight: Business Insights

In this course, you become familiar with some of the most important features of OnCommand® Insight for the day-to-day management, monitoring, and troubleshooting of data infrastructures. This course concentrates on the reporting features of OnCommand Insight and the OnCommand Insight Data Warehouse. This course demonstrates how to use OnCommand Insight to perform operational reporting that aids in daily administrative tasks. This course also demonstrates how to use IBM Cognos Analytics to perform business reporting. By learning how to create customized reports, you should come away with a basic understanding of how to extend Insight to meet other business reporting needs.
2.0 ngày

CCWWFA: Creating and Customizing Workflows Using OnCommand Workflow Automation

This course shows new storage architects how to use OnCommand® Workflow Automation (OnCommand WFA) to eliminate error-prone manual processes for storage management in their organizations. The course describes how to design and customize workflows to meet organizations’ storage requirements. The course also describes how to create design elements, such as commands, finders, data sources, and functions. Finally, the course provides an overview of REST APIs and the NetApp PowerShell Toolkit and how this toolkit integrates with OnCommand WFA.
2.0 ngày

OCIIO: OnCommand Insight: Intelligent Operation

In this certification & training course, you become familiar with some of the most important features of NetApp OnCommand Insight, relevant to the day-to-day management, monitoring, and troubleshooting of data infrastructures. The course concentrates on the Insight features that aid in daily system administration tasks. If you are interested in Insight features that relate to business reporting or IT department integration you should look for course offerings specific to those topics. The course takes you through a typical storage administration issue and the Insight features that you can use to resolve that issue. By learning how to resolve specific administration problems, you should gain a basic understanding of how to extend the Insight feature set to other issues. You will also learn how to add new assets to an Insight monitored infrastructure.
2.0 ngày

MCCIPIW: ONTAP (9.6) MetroCluster IP Implementation

MetroCluster software is a unique, high-availability, and disaster-recovery solution. In this course, you learn how to cable and set up a MetroCluster environment. You complete participatory exercises to practice the configuration and verification steps. You also learn how to identify component failures and practice recovery steps.
2.0 ngày

CATSP: ONTAP Troubleshooting

In this Partner-only course, you increase your proficiency as a NetApp® ONTAP® software engineer by learning how to troubleshoot ONTAP environments. Specifically, you learn how to troubleshoot the management component, scale-out networking, NAS protocols (NFS and SMB), and SAN protocols (iSCSI). From lectures, demonstrations, and active exercises, you learn how to isolate issues, verify configurations, view logs, view trace messages, and use event management system messages for troubleshooting.
4 ngày

COIW: ONTAP Cluster Installation Workshop

This advanced installation course prepares you to deliver ONTAP® system installation services in a way that meets NetApp® quality standards and uses NetApp best practices. With your laptop and the appropriate tools, you practice all installation tasks and set up NetApp storage controllers and shelves in a clustered configuration. You learn how to set up and test access to the system and the AutoSupport connection, and you learn how to conduct a customer handoff briefing.
2.0 ngày

MCCIIW: ONTAP MetroCluster Installation

MetroCluster software is a unique high-availability and disaster-recovery solution. In this course, you learn how to cable and set up a MetroCluster environment. Using active, participatory exercises, you practice the configuration and verification steps. You also learn how to identify component failures and practice recovery steps

BNCA: Basic NetApp Configuration and Administration

This two-day course provides a technical overview of the features and benefits of NetApp ONTAP 9 data-management software. The course enables you to explain the architecture and functionality of an ONTAP cluster. You will also be introduced to basic administration, configuration and management of an ONTAP cluster. Through hands-on exercises, you will learn how to create a cluster, aggregates, storage virtual machines (SVMs), LIFs, FlexVol volumes and Snapshot copies.
2.0 ngày

UNCMMAZ: Using NetApp Cloud Manager in Microsoft Azure

Learn to implement a hybrid cloud solution with Microsoft Azure by using NetApp® Cloud Volumes ONTAP®. Connect an Azure Virtual Network (VNet) and an on-premises data center to unify your infrastructure. Use NetApp Cloud Manager to move data and manage storage in the hybrid cloud. Learn about how NetApp cloud services are integrated into Cloud Manager to provide persistent storage for Kubernetes containers and enhance data protection, security, and compliance. Learn to optimize capacity and performance of Cloud Volumes ONTAP.
3.0 ngày

INTHCDF: Integrating Hybrid Clouds with NetApp Data Fabric

In this certification & training course you will learn to implement a hybrid cloud solution with Amazon Web Services using NetApp® Cloud Volumes ONTAP®. Connect an AWS Virtual Private Cloud and an on-premises data center to unify your infrastructure. Use NetApp Cloud Manager to move and manage storage in the hybrid cloud. Learn about NetApp cloud services integrated into Cloud Manager to provide persistent storage for Kubernetes containers and enhance data protection, security, and compliance. Learn to optimize capacity and performance of Cloud Volumes ONTAP.
3.0 ngày

FPDESIGN: Designing the FlexPod Solution

This 2-day, instructor led certification & training course shows you how to evaluate the FlexPod solution design process in regard to the contemporary data center challenges. The course follows a standard design methodology that is used to create FlexPod designs. FlexPod architectures, components, design principles, use cases and preconfigured solutions are examined. Using NetApp and Cisco tools, learners create FlexPod designs that correlate to real-world environments.
2.0 ngày

FPIMPADM: Implementing and Administering the FlexPod Solution

FlexPod Implementation and Administration is a 3-day instructor-led certification & training course where you will learn to set up, configure, and administer the FlexPod architecture. The course provides a comprehensive understanding of the configuration requirements for FlexPod at the network, storage, and compute layers of the architecture. FlexPod can be used to deploy and manage internal, external, and cloud architectures. Centralized administration is achieved by using management tools such as Cisco UCS Director, NetApp Virtual Storage Console, and vCenter. These management tools are introduced and practical hands on labs are used to reinforce topics.
3.0 ngày

ORONSS: Implementing Oracle on NetApp Storage Systems

In this course you learn how to implement an Oracle Database solution in a NetApp storage environment. Through lecture and hands-on exercises, you practice discovering, planning, designing and provisioning an Oracle environment. In this class you install Oracle, configure an Oracle database; use several solutions to back up Oracle databases, and restore an Oracle database. The material of this class is not meant to provide an exhaustive study of Oracle. The purpose of this class is to practice the specific steps of the deployment and administration of an Oracle database using NetApp clustered Data ONTAP and NetApp integrated data protection technology.
3.0 ngày

COMNESES: Configuring and Monitoring NetApp E-Series and EF-Series Storage Systems

In this certification & training course, you learn how to deploy, configure, and monitor NetApp E-Series or EF-Series storage systems. In the deployment phase, you use both the NetApp SANtricity® Storage Management and System Management software to create the configuration, perform administrative tasks, and employ data protection features. You also learn how to configure attached servers for I/O operations. During post-deployment, you use SANtricity Unified Manager and System Management software and to collect storage system information for trend analysis, troubleshooting, performance monitoring and tuning.
4.0 ngày

SNAPPSAP: SnapProtect Solution Administration

This certification & training course prepares you to operate a NetApp® SnapProtect® CommCell with the following clients: NAS, Microsoft SQL, Microsoft Exchange, VMware® vCenter and other virtual server clients. The administrative best practices for trouble-free operation are emphasized throughout the course
2.0 ngày

SCADMIN: SnapCenter Administration

This course focuses on the deployment of NetApp® SnapCenter® Server 4.4. You learn how to install, monitor, and manage SnapCenter Server. The course also discusses installation and use of licenses and role-based access control. You learn how to prepare hosts, install SnapCenter Plug-ins, and connect to NetApp ONTAP® AFF and FAS storage systems. You also review backup and restore of Windows file system data and the configuration of SnapMirror® and SnapVault® relationships for use with SnapCenter software. The course materials include an exercise workbook that serves as an on-the-job reference guide.
3.0 ngày

OCSA: ONTAP Compliance Solution Administration

The ONTAP Security and Compliance course describes the architecture and functionality of the integrated data protection security and compliance features and benefits in ONTAP 9 data-management software, including SnapLock software, key management features, and encryption technologies. The course also explains the administration, configuration, and management of the integrated data protection compliance features. ONTAP Security and Compliance Solutions Administration is intended for data protection administrators of any experience level
1.0 ngày

DATAPROT9: ONTAP Data Protection Administration 9.10

This intermediate-level course introduces key concepts and techniques for protecting data on NetApp® ONTAP® based systems. You learn about the data protection solutions that are integrated in ONTAP software. You also learn about tools for managing ONTAP data protection features. In the hands-on exercises, you use ONTAP System Manager and the ONTAP CLI to perform key data protection tasks. This course is updated for ONTAP 9.10.1 software.
2.0 ngày

NAASD: NetApp Architecture & Storage Design Workshop

This course enables the participants to evaluate project requirements and to develop a suitable NetApp storage solution. The course gives an overview of current concepts and requirements in the mid-range and high-end storage solutions and shows how a storage solution is optimally integrated into the IT landscape. Concepts of storage networks, storage systems and backup solutions are also discussed, with an emphasis on functionality, availability, administration and security.
5.0 ngày

RSTAPI: Automate Storage Administration Using ONTAP REST API and Ansible

This certification & training course prepares you to automate storage administration of a NetApp® ONTAP® system by using modern REST APIs and Ansible. You learn about the structure of an ONTAP REST API. You write Python programs that use the Python client library to create an aggregate, a storage virtual machine (SVM), a volume, a qtree, a snapshot, and so on. You learn how to use NetApp PowerShell Toolkit scripts that invoke REST API methods to demonstrate popular use case scenarios. You use the modern Ansible framework to automate and deploy storage administration tasks through ONTAP modules. Finally, you use Python programs and Ansible to configure your system for CIFS, NFS, and SAN protocols. This training includes classroom lecture, coding demonstrations, and hands-on programming activities.
3.0 ngày

NASPAD: Managing NAS and Performance on Clustered Data ONTAP

This course is a combination of ONTAP NFS Administration (NFSAD), SMB (CIFS), and performance analysis courses into a single, in-depth one-week course. It provides the knowledge and skills that you need to administer SMB version 1.x to 3.x and NFS versions 3, 4, and 4.1 in a clustered Data ONTAP® operating system. You also learn the knowledge and skills that you need to collect and analyze system performance data from NetApp storage systems that are running ONTAP 9.
5.0 ngày

SGWSADM: StorageGRID Administration 11.5

This course is a comprehensive analysis of NetApp StorageGRID administration. You learn how to configure, monitor, maintain, and expand a StorageGRID system. The course outlines the new features and enhancements in StorageGRID 11.5. The course materials include a guide for hands-on exercises that you perform in a lab environment. This course also builds on the concepts that you learned in StorageGRID Fundamentals and is complementary to Installing StorageGRID.
3.0 ngày

PERFCDOT - ONTAP Performance Analysis

This certification & training course enables you to collect and analyze system performance data from NetApp® storage systems that run NetApp ONTAP® 9 software. You learn how to interpret data and how to identify and implement changes that improve system efficiency. You also learn how to use system commands and features to monitor and enhance storage system performance. You learn from hands-on exercises, case studies, and technical discussions.
3.0 ngày

CIFSAD - ONTAP SMB Administration 9.9

This course extends the SMB information that is discussed in the ONTAP Cluster Administration course. Learn how to configure the SMB client for NetApp® ONTAP® 9.9.1 software. Also learn about advanced ONTAP 9 features that support the SMB protocol. The exercises in this course use ONTAP 9.9.1 software.
2.0 ngày

NFSAD - ONTAP NFS Administration

This course extends the NFS information that is found in the ONTAP Cluster Administration course. This course reviews NFS and explores in more detail different NFS versions and the features of ONTAP 9 software that support the NFS protocol. The exercises are accomplished using ONTAP 9 software.
1.0 ngày

CDOTDP9 - ONTAP 9.10 ONTAP Cluster Administration and Data Protection Bundle

This 5 day certification & training course comprises the ONTAP Cluster Administration (ONTAP9ADM) followed by the 2 day ONTAP Data Protection Administration (DATAPROT9) courses. The first 3 days uses lecture and hands-on exercises to teach the basic administration tasks of an ONTAP 9.9 cluster. You use the cluster shell and OnCommand System Manager to manage storage and network resources. ONTAP Cluster Administration is an intermediate course in a comprehensive learning path for NetApp customers, partners and employees.  
5.0 ngày

ONTAP9ADM - ONTAP Cluster Administration 9.10

In this certification & training course, you learn the basic administration tasks of a NetApp® ONTAP® 9.10 cluster. You use the clustershell and NetApp ONTAP System Manager to manage cluster storage and network resources. The course explains the configuration of basic data protection and data efficiency functions and common cluster maintenance tasks.
3.0 ngày

Cơ hội nhận ưu đãi học phí lên tới 60%

Trainocate - Đối tác đào tạo ủy quyền của hơn 30 hãng công nghệ hàng đầu thế giới
Ngày
00
Giờ
0
Phút
0
Giây
0

Đăng ký tư vấn
cùng đội ngũ chuyên gia Trainocate!!

Bản quyền thuộc về Trainocate Việt Nam

back to top
icon đăng ký