CÔNG TY TNHH TRAINOCATE VIỆT NAM
DUCCE - Deploying Cisco Unified Contact Center Enterprise v2.0

DUCCE - Deploying Cisco Unified Contact Center Enterprise v2.0

DUCCE - Deploying Cisco Unified Contact Center Enterprise v2.0

Overview

Duration: 5.0 days

Deploying Cisco Unified Contact Center Enterprise (DUCCE) is a 5-day instructor-led course presented by training partners. The course allows learners to deploy the Unified CCE v10.0 solution including installation, deploying HA and using troubleshooting tools to identify issues with inbound and outbound Contact Center functionality. This course is intended for those installing the Unified CCE solution, or those providing Level 3 solution support. This course also serves as a foundation for the two corresponding UCCE Administration courses, but is not a prerequisite. Students will learn enough about CCE scripting in this course to ensure system functionality only. A separate course exists for advanced scripting.

Objectives

Upon completion of this course, you will be able to:

  • These are the ones listed in the Objectives Table I put together:
  • Identify the basic components and operations of the Unified CCE solution.
  • Use the available UCCE tools to complete a basic UCCE system installation.
  • Discuss the installation and configuration steps required to support agent functionality in a UCCE deployment.
  • Install a basic CCE VXML Solution.
  • Install, configure and run a CCE Outbound Option Campaign.
  • Describe how to support CCE.

Content

Module 1: Cisco Unified Contact Center Enterprise v10 Foundations

  • Lesson 1-1: Introducing UCCE
  • Lesson 1-2: Unified CCE Architecture and Components
  • Lesson 1-3: UCCE Terms, Routing and Additional Components
  • Lesson 1-4: Accessing UCCE Tools

Module 2: Preparing UCCE for Basic IVR Scripting

  • Lesson 2-1: UCCE Protocols and Call Flows
  • Lesson 2-2: Using Domain Manager
  • Lesson 2-3: Introducing the Unified CCE Main Installer
  • Lesson 2-4: Central Controller Installation
  • Lesson 2-5: Installing Admin Data Servers and Clients
  • Lesson 2-6: Configuring ICM for CVP
  • Lesson 2-7: Configuring CVP for UCCE
  • Lesson 2-8: UCCE Voice Gateway Internetworking Considerations
  • Lesson 2-9: Basic IVR Scripting with Microapps

Module 3: Preparing UCCE for Basic Agent Functionality

  • Lesson 3-1: Configure UCM to Support UCCE
  • Lesson 3-2: Installing UCCE CTI Software
  • Lesson 3-3: UCCE Configuration and Scripting for Additional Agent and IVR Functionality
  • Lesson 3-4: Enabling Transfers and RONA

Module 4: Installing and Configuring CCE VXML Solution

  • Lesson 4-1: Basic VXML Functionality
  • Lesson 4-2: Installing and Configuring VXML Solution
  • Lesson 4-3: Exploring Courtesy Callback

Module 5: Installing CCE Outbound Option

  • Lesson 5-1: Introduction to Outbound Option
  • Lesson 5-2: Outbound Option Installation and Configuration
  • Lesson 5-3: Configuring Outbound Option for Agent and IVR Campaigns

Module 6: Supporting CCE

  • Lesson 6-1: ICM Processes
  • Lesson 6-2: Diagnostic Framework Suite
  • Lesson 6-3: UCCE Support
  • Lesson 6-4: Service Assurance

Lab Details:

  • Lab 1-1: Overview of the UCCE Lab Environment
  • Lab 1-2: Explore Voice Gateway
  • Lab 1-3: Explore CVP and ICM Servers
  • Lab 2-1: Install the ICM Main Installer
  • Lab 2-2: Install ICM Central Controller and Admin Data Server/HDS
  • Lab 2-3: Configure/Install PG for CVP and UCM
  • Lab 2-4: Install, Configure and License CVP Components
  • Lab 2-5: Configure IOS Voice Gateway for CVP
  • Lab 2-6: Configure ICM for CVP Scripting
  • Lab 2-7: Prepare a simple CVP Test Script
  • Lab 2-8: Use ICM Tools to Observe Script Progress
  • Lab 3-1: ICM Scripting with MicroApps
  • Lab 3-2: Configure ICM for Basic Agent Functionality
  • Lab 3-3: Install CTI Components
  • Lab 3-4: CTI Route Point Initiated Calls
  • Lab 3-5: Configure Calls Using SIP with Proxy
  • Lab 4-1: Configure Courtesy Callback (CCB)
  • Lab 5-1: Install and Configure Cisco Outbound Option – SIP
  • Lab 6-1: Using Troubleshooting Tools
  • Lab 6-2: Instructor Break/Fix Lab

Audience

  • Channel Partner / Reseller
  • Customer
  • Employee

Prerequisites

The knowledge and skills that a learner must have before attending this course are as follows:

  • Working knowledge of basic networking and components (router, switch, NIC).
  • Working knowledge of Microsoft Windows Server deployed within an Active Directory environment.
  • Working knowledge of a Windows computer including a mouse and the simultaneous use of the Alt-Tab keys.

Certification

This course is part of the following Certifications:

  • Voice / UC
  • Cisco Unified Contact Center Enterprise Specialist

Lịch khai giảng

Form đăng ký

Bằng cách nhấn nút "ĐĂNG KÝ", tôi hoàn toàn đồng ý với Chính sách quyền riêng tư

Các khóa đào tạo Cisco khác

DTCSM - Cisco Customer Success Manager v2.1

The Cisco Customer Success Manager (DTCSM) v2.1 course gives you the confidence and competence to fulfill the Customer Success Manager (CSM) role successfully, helping your customers realize value from their solutions and achieve their business outcomes. The course offers experiential learning through practical exercises using situations based on real-life use cases and case studies. In this highly interactive course, you can practice and gain confidence in fulfilling core tasks using best-practice tools and methodologies while receiving feedback from the facilitator and your peers.  
3.0 ngày

SPVI - Implementing Cisco Service Provider VPN Services v1.0

The Implementing Cisco Service Provider VPN Services (SPVI) v1.0 course prepares you to manage end-customer Virtual Private Network (VPN) environments built over a common service provider Multiprotocol Label Switching (MPLS) backbone. You will complete hands-on labs to reinforce MPLS VPN fundamental concepts, benefits, and classification, MPLS components, MPLS control plane and data plane operations, MPLS VPN routing using Virtual Routing and Forwarding (VRF), Layer 2 and Layer 3 MPLS VPNs, IPv6 MPLS VPN implementations, IP Multicast VPNs, and shared services VPNs. The course also covers solutions for deploying MPLS VPN crossing multiple Service Provider domains that improve the use of network bandwidth.
5.0 ngày

SPRI - Implementing Cisco Service Provider Advanced Routing Solutions v1.0

The Implementing Cisco Service Provider Advanced Routing Solutions (SPRI) certification & training course teaches you theories and practices to integrate advanced routing technologies including routing protocols, multicast routing, policy language, Multiprotocol Label Switching (MPLS), and segment routing, expanding your knowledge and skills in service provider core networks.
5.0 ngày

SPCOR - Implementing and Operating Cisco Service Provider Network Core Technologies v1.0

The Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR 350-501) v1.0 course teaches you how to configure, verify, troubleshoot, and optimize next-generation, Service Provider IP network infrastructures. It provides a deep dive into Service Provider technologies including core architecture, services, networking, automation, quality of services, security, and network assurance.
5.0 ngày

BGP - Configuring BGP on Cisco Routers v4.0

Configuring BGP on Cisco Routers version 4.0 provides students with in-depth knowledge of Border Gateway Protocol (BGP), the routing protocol that is one of the foundations of the Internet and New World technologies such as Multiprotocol Label Switching (MPLS). This curriculum covers the theory of BGP, configuration of BGP on Cisco IOS routers, detailed troubleshooting information, and hands-on exercises that provide learners with the skills that they need to configure and troubleshoot BGP networks in customer environments. Different service solutions in the curriculum cover BGP network design issues and usage rules for various BGP features, preparing learners to design and implement efficient, optimal, and trouble-free BGP networks.
5.0 ngày

MPLS - Implementing Cisco MPLS v3.0

Enterprises and service providers face many challenges in terms of customer demand, including an ongoing need for value-added services. Conventional IP packet forwarding has several limitations, and more and more enterprise and service providers realize that something else is needed. Not only they must be concerned with protecting their existing infrastructure, but they must also find ways to generate new services that are not currently supportable using existing technologies.
5.0 ngày

SESA - Securing Email with Cisco Email Security Appliance v3.1

The Securing Email with Cisco Email Security Appliance (SESA) v3.1 course shows you how to deploy and use Cisco® Email Security Appliance to establish protection for your email systems against phishing, business email compromise, and ransomware, and to help streamline email security policy management. This hands-on course provides you with the knowledge and skills to implement, troubleshoot, and administer Cisco Email Security Appliance, including key capabilities such as advanced malware protection, spam blocking, anti-virus protection, outbreak filtering, encryption, quarantines, and data loss prevention.
4.0 ngày

802.1X - Introduction to 802.1X Operations for Cisco Security Professionals v2.0

The Introduction to 802.1X Operations for Cisco Security Professionals (802.1X) v2.0 shows you how to configure and prepare to deploy Cisco® Identity-Based Networking Services (IBNS) solutions based on Cisco Identity Services Engine (ISE), Cisco Catalyst switches, and Cisco Wireless LAN Controllers. You will learn the fundamentals of the 802.1X protocol and configuration, Cisco IBNS, configuring access for non-supplicant devices, Cisco ISE deployment options, architectural components, considerations with 802.1X, and more. You will also gain hands-on experience configuring 802.1X–based network services using the Cisco Identity Services Engine and a Cisco Catalyst switch.
2.0 ngày

SSECMGT - Managing Enterprise Security with Cisco Security Manager v4.0

The Managing Enterprise Security with Cisco Security Manager (SSECMGT) v4.0 course is a five-day instructor-led course that is aimed at providing network security engineers with the knowledge and skills that are needed to configure and deploy Cisco Security Manager. The course also provides an overview of network security technologies, and includes case studies that are useful for deployment scenarios.

SWISE - Implementing Cisco Identity Services Engine for Wireless Engineers v1.0

The Implementing Cisco Identity Services Engine for Wireless Engineers (SWISE) version 1.0 certification & training course is a 2-day Instructor-led Training course. Cisco Identity Services Engine (ISE) combined with the Cisco Wireless LAN Controller (WLC), access point (AP), and end devices provide the comprehensive Cisco ISE deployment capabilities and solution into one system. This training course will enable Cisco end customers and authorized Cisco System Engineers (SEs) to understand the concepts, architecture, and use cases that are related to the Cisco ISE. This course will also prepare learners to implement basic Cisco ISE solutions. The focus is to ensure that students can implement the core features of Cisco ISE that most implementations require. Students should already be familiar with basic Cisco WLC and AP configuration.
2.0 ngày

SENFTD25 - Securing Enterprise Networks with Cisco FirePOWER Threat Defense v25

Multifaceted, highly dynamic applications and bring-your-own-device (BYOD) workplaces have become the norm. And with them comes the challenge to balance productivity with security Cisco has the industry’s first adaptive, threat-focused next-generation firewall (NGFW) designed for a new era of threat and advanced malware protection.  
1.0 ngày

SSNGFW - Securing Networks with Cisco Firepower Next Generation Firewall v1.0

The Securing Networks with Cisco Firepower Next Generation Firewall (SSNGFW) v1.0 course shows you how to deploy and use Cisco Firepower® Threat Defense system. This hands-on certification & training course gives you knowledge and skills to use and configure Cisco® Firepower Threat Defense technology, beginning with initial device setup and configuration and including routing, high availability, Cisco Adaptive Security Appliance (ASA) to Cisco Firepower Threat Defense migration, traffic control, and Network Address Translation (NAT). You will learn how to implement advanced Next-Generation Firewall (NGFW) and Next-Generation Intrusion Prevention System (NGIPS) features, including network intelligence, file type detection, network-based malware detection, and deep packet inspection. You will also learn how to configure site-to-site VPN, remote-access VPN, and SSL decryption before moving on to detailed analysis, system administration, and troubleshooting.
5.0 ngày

SSFIPS - Securing Networks with Cisco Firepower Next-Generation IPS v4.0

The Securing Networks with Cisco Firepower Next-Generation IPS (SSFIPS) v4.0 certification & training course shows you how to deploy and use Cisco Firepower® Next-Generation Intrusion Prevention System (NGIPS). This hands-on course gives you the knowledge and skills to use the platform features and includes firewall security concepts, platform architecture and key features; in-depth event analysis including detection of network-based malware and file type, NGIPS tuning and configuration including application control, security intelligence, firewall, and network-based malware and file controls; Snort® rules language; file and malware inspection, security intelligence, and network analysis policy configuration designed to detect traffic patterns; configuration and deployment of correlation policies to take action based on events detected; troubleshooting; system and user administration tasks, and more
5.0 ngày

SWSA - Securing the Web with Cisco Web Security Appliance v3.0

The Securing the Web with Cisco Web Security Appliance (SWSA) v3.0 course shows you how to implement, use, and maintain Cisco® Web Security Appliance (WSA), powered by Cisco Talos, to provide advanced protection for business email and control against web security threats. Through a combination of expert instruction and hands-on practice, you’ll learn how to deploy proxy services, use authentication, implement policies to control HTTPS traffic and access, implement use control settings and policies, use the solution’s anti-malware features, implement data security and data loss prevention, perform administration of Cisco WSA solution, and more.
2.0 ngày

SSFSNORT - Securing Cisco Networks with Open Source Snort v3.0

The Securing Cisco Networks with Open Source Snort (SSFSNORT) v3.0certification & training  course shows you how to deploy Snort® in small to enterprise-scale implementations. You will learn how to install, configure, and operate Snort in Intrusion Detection System (IDS) and Intrusion Prevention System (IPS) modes. You’ll practice installing and configuring Snort, utilize additional software tools and define rules to configure and improve the Snort environment, and more.
4.0 ngày

SSFRULES - Securing Cisco Networks with Snort Rule Writing Best Practices 2.1

The Securing Cisco Networks with Snort Rule Writing Best Practices (SSFRules) v2.1 course shows you how to write rules for Snort, an open-source intrusion detection and prevention system. Through a combination of expert-instruction and hands-on practice, this course provides you with the knowledge and skills to develop and test custom rules, standard and advanced rules-writing techniques, how to integrate OpenAppID into rules, rules filtering, rules tuning, and more. The hands-on labs give you practice in creating and testing Snort rules.
3.0 ngày

SSFAMP - Protecting Against Malware Threats with Cisco AMP for Endpoints v6.0

The Protecting Against Malware Threats with Cisco AMP for Endpoints (SSFAMP) v6.0 course shows you how to deploy and use Cisco® AMP for Endpoints, a next-generation endpoint security solution that prevents, detects, and responds to advanced threats. Through expert instruction and hands-on lab exercises, you will learn how to implement and use this powerful solution through several step-by-step attack scenarios. You’ll learn how to build and manage a Cisco AMP for Endpoints deployment, create policies for endpoint groups, and deploy connectors. You will also analyze malware detections using the tools available in the AMP for Endpoints console.
3.0 ngày

SVPN - Implementing Secure Solutions with Virtual Private Networks v1.0

The Implementing Secure Solutions with Virtual Private Networks (SVPN) v1.0 certification & training course teaches you how to implement, configure, monitor, and support enterprise Virtual Private Network (VPN) solutions. Through a combination of lessons and hands-on experiences you will acquire the knowledge and skills to deploy and troubleshoot traditional Internet Protocol Security (IPsec), Dynamic Multipoint Virtual Private Network (DMVPN), FlexVPN, and remote access VPN to create secure and encrypted data, remote accessibility, and increased privacy. This course will prepare you for the 300-730 Implementing Secure Solutions with Virtual Private Networks (SVPN) exam.
5.0 ngày

SCOR - Implementing and Operating Cisco Security Core Technologies v1.0

The Implementing and Operating Cisco Security Core Technologies (SCOR) v1.0 course helps you prepare for the Cisco® CCNP® Security and CCIE® Security certifications and for senior-level security roles. In this certification & training course, you will master the skills and technologies you need to implement core Cisco security solutions to provide advanced threat protection against cybersecurity attacks. You will learn security for networks, cloud and content, endpoint protection, secure network access, visibility, and enforcements. You will get extensive hands-on experience deploying Cisco Firepower® Next-Generation Firewall and Cisco Adaptive Security Appliance (ASA) Firewall; configuring access control policies, mail policies, and 802.1X Authentication; and more. You will get introductory practice on Cisco Stealthwatch® Enterprise and Cisco Stealthwatch Cloud threat detection features.
5.0 ngày

SISE - Implementing and Configuring Cisco Identity Service Engine v3.0

The Implementing and Configuring Cisco Identity Services Engine (SISE) v3.0 course shows you how to deploy and use Cisco® Identity Services Engine (ISE) v2.4, an identity and access control policy platform that simplifies the delivery of consistent, highly secure access control across wired, wireless, and VPN connections. This hands-on certification & training course provides you with the knowledge and skills to implement and use Cisco ISE, including policy enforcement, profiling services, web authentication and guest access services, BYOD, endpoint compliance services, and TACACS+ device administration. Through expert instruction and hands-on practice, you will learn how to use Cisco ISE to gain visibility into what is happening in your network, streamline security policy management, and contribute to operational efficiency.
5.0 ngày

SDWFND - Cisco SD-WAN Operation and Deployment v1.0

The Cisco SD-WAN Operation and Deployment v1.0 certification & training  course provides an overview of the Cisco® Software-Defined WAN (SD-WAN) solution and SD-WAN components. You will learn how to create, manage, and operate a secure extensible network using Cisco SD-WAN products. This certification & training course covers how to configure, operate, and monitor overlay routing in a secure extensible network. In addition, you will learn about policies and Quality of Service (QoS) in the SD-WAN overlay network.
2.0 ngày

ECMS2 - Engineering Cisco Meraki Solutions Part 2 v2.0

The certification & training course, Engineering Cisco Meraki Solutions Part 2 (ECMS2) v2.0 elevates your knowledge of Cisco Meraki technology suite. In this advanced technical training course, you'll learn how to plan for network deployments and integrations using the Cisco Meraki platform. Through practical hands-on instruction and experiences, you will learn how to operate Meraki networks and troubleshoot complex network incidents using the Meraki Dashboard and analytics. You will also learn how to design Meraki architectures for redundancy, high-density, and scalability by implementing comprehensive Meraki product features to meet design objectives. This course is the second of two courses that prepares you for Cisco Meraki certification.

ECMS1 - Engineering Cisco Meraki Solutions Part 1 v2.0

The Engineering Cisco Meraki Solutions Part 1 (ECMS1) v2.0 is an introductory course the equips you with the technical knowledge and skills to confidently operate Cisco Meraki solutions as a unified management system of an entire network from a centralized dashboard. Through a full day of instruction including live demos and guided lab practice, you will learn how to implement core configurations for a full stack solution in the Meraki Dashboard and leverage essential Meraki Dashboard tools to enforce device security policies, deploy software and apps, and perform remote, live troubleshooting on managed devices. This is the first of two courses that prepare you for the Cisco Meraki Solutions Specialist certification exam.
1.0 ngày

DESGN - Designing for Cisco Internetwork Solutions v3.0

DESGN v3.0 includes major updates and follows the updated blueprint for associated exam of CCDA 200-301. However, note that this course might not not cover all items listed on the blueprint to the extent that the exam expects of the candidate. Students, in order to pass the exam, need to carefully study the exam blueprint and gain clear understanding of knowledge and skills listed.
5.0 ngày

IP6FD - IPv6 Fundamentals, Design, and Deployment v3.0

The course also provides an overview of IPv6 technologies; covers IPv6 design and implementation; describes IPv6 operations, addressing, routing, services, and transition; and describes deployment of IPv6 in enterprise networks as well as in service provider networks. The course also includes case studies that are useful for deployment scenarios and remote labs.
5.0 ngày

MCAST - Implementing Cisco Multicast v2.0

Implementing Cisco Multicast v2.0 - Is a five-day instructor-led course designed to provide technical solutions for simple deployments of IP multicast within a provider or customer network. This course covers the fundamentals of IP multicasting including multicast applications, sources, receivers, group management, and IP multicast routing protocols (such as Protocol Independent Multicast [PIM]) used within a single administrative domain (intradomain). The issues of switched LAN environments and reliable IP multicasting have also been incorporated.
5.0 ngày

DNACPRM10 - Cisco DNA Center Programmability v1.0

With Cisco DNA Center being the heart of Cisco’s intent-based network architecture, it supports the expression of business intent for network use cases, such as base automation capabilities in the enterprise network. From this workshop, the participants will be able to explore the opportunity of programmability using the various APIs available on DNAC, to automate tasks, collect data for analysis and troubleshoot. At the end of this workshop, participants will be able to demonstrate their understanding on APIs and how to utilize the APIs of the DNAC to manage, operate and troubleshoot enterprise networks.
2.0 ngày

ENTEIT - Implementing and Troubleshooting Networks Using Cisco ThousandEyes v1.0

The Implementing and Troubleshooting Networks Using Cisco ThousandEyes (ENTEIT) v1.0 course is designed to introduce you to and familiarize you with Cisco® ThousandEyes. Through a combination of lectures and hands-on experience, you will learn to implement and configure the Cisco ThousandEyes solution. You will also learn to install and configure the Cisco ThousandEyes agents with different test types. This solution will also enable you to perform root cause analysis when troubleshooting. 
3.0 ngày

PRNE - Programming for Network Engineers v2.0

The Programming for Network Engineers (PRNE) v2.0 certification & training course is designed to equip you with fundamental skills in Python programming. Through a combination of lectures and lab experience in simulated network environments, you will learn to use Python basics to create useful and practical scripts with Netmiko to retrieve data and configure network devices. Upon completion of this course, you should have a basic understanding of Python, including the knowledge to create, apply, and troubleshoot simple network automation scripts.
4.0 ngày

ENSDWI - Implementing Cisco SD-WAN Solutions v2.0

This certification & training course replaces SDWAN300. The Implementing Cisco SD-WAN Solutions (ENSDWI) v2.0 course gives you training about how to design, deploy, configure, and manage your Cisco® Software-Defined WAN (SD-WAN) solution in a large-scale live network, including how to migrate from legacy WAN to SD-WAN. You will learn best practices for configuring routing protocols in the data center and the branch, as well as how to implement advanced control, data, and application-aware policies. The course also covers SD-WAN deployment and migration options, placement of controllers, how to deploy WAN Edge devices, and how to configure Direct Internet Access (DIA) breakout. The course looks at the different Cisco SD-WAN security options available, such as application-aware enterprise firewall, Intrusion Prevention System (IPS), URL filtering, Cisco Advanced Malware Protection (AMP), Secure Sockets Layer/Transport Layer Security (SSL/TLS) proxy, and Cisco Umbrella® Secure Internet Gateway (SIG).
5.0 ngày

ENWLSD - Designing Cisco Enterprise Wireless Networks v1.1

The Designing Cisco Enterprise Wireless Networks (ENWLSD) v1.1 course gives you the knowledge you need to design Cisco® wireless networks. The course covers design specifics from scenario design concepts through the installation phase and into post-deployment validation. This course, including the self-paced material, helps prepare you to take the exam, Designing Cisco Enterprise Wireless Networks (300-425 ENWLSD), which leads to to the new CCNP® Enterprise& and Cisco Certified Specialist – Enterprise Wireless Design certifications. This course also earns you 40 Continuing Education (CE) credits towards recertification.
5.0 ngày

WDAWL - Deploying Advanced Cisco Wireless LANs v1.2

This certification & training course will enable network planners and administrators to deploy an efficient wireless LAN (WLAN) advanced enterprise solution. To accomplish this, the course is designed to provide the learner a better understanding and appreciation of the complexities involved in efficiently supporting, client mobility, network efficiency, areas of high client density, high availability, advanced guest networking, and IPv6 support.
2.0 ngày

WDBWL - Cisco Deploying Basic Wireless LANs v1.2

This certification & training course is designed to give you a firm understanding of the Cisco Unified Wireless Networking for enterprise deployment scenarios. In this course, you will learn the basics of how to install, configure, operate, and maintain a wireless network, both as an add-on to an existing wireless LAN (WLAN) and as a new Cisco Unified Wireless Networking solution. It will build on top of the Wireless LAN terms, concepts, protocols, architecture and Wireless LAN characteristics introduced in the Defining Cisco Wireless LAN Essentials (WLE) eLearning course. In the WDBWL course, you will investigate the components, features, and deployment aspects of the system. You will have the opportunity to reinforce what you learn with hands-on labs. This course focuses on the essential network elements of a WLAN, access points (APs) and wireless LAN controllers (WLCs). It provides high-level information about the optional but recommended network management and services appliance components of a Cisco Unified Wireless Network - the Cisco Prime Infrastructure (PI), and Mobility Services Engine (MSE) but does not provide hands-on labs and in-depth coverage of these components. The course also covers the differences when deploying a Cisco wireless LAN FlexConnect architecture.
3.0 ngày

C98WF6 - Configuring Cisco Catalyst 9800 and Intro to WIFI6 v2.0

Configuring Cisco Catalyst 9800 and Intro to WIFI6 is a course designed to help students understand how the Catalyst 9800 Series wireless controllers combine the best of RF excellence with IOS XE benefits. This course begins with a description of the Cisco Catalyst 9800 and its benefits while introducing the learner to WIFI6. The configuration, migration, and troubleshooting will also be covered in this instructor-led course.
3.0 ngày

ENWLSI - Implementing Cisco Enterprise Wireless Networks v1.1

The Implementing Cisco Enterprise Wireless Networks (ENWLSI) v1.1 course gives you the knowledge and skills needed to create a secure wireless network infrastructure and troubleshoot any related issues. You’ll learn how to implement and fortify a wireless network infrastructure using Cisco Identity Service Engine (ISE), Cisco Prime Infrastructure (PI), and Cisco Connect Mobile Experience to monitor and troubleshoot network issues.
5.0 ngày

ENSLD - Designing Cisco Enterprise Networks v1.1

The Designing Cisco Enterprise Networks (ENSLD) v1.1 certification & training course gives you the knowledge and skills you need to design an enterprise network. This course serves as a deep dive into enterprise network design and expands on the topics covered in the Implementing and Operating Cisco® Enterprise Network Core Technologies (ENCOR) v1.0 course.

ENC9K - Implementing Cisco Catalyst 9000 Series Switches v3.0

The Implementing Cisco Catalyst 9000 Switches (ENC9K) v3.0 course introduces you to the architecture, capabilities, and implementation of the Cisco® Catalyst® 9000 switching platform. This hands-on course covers many features of this Cisco IOS® XE platform and describes how to manage devices from a single dashboard called Cisco DNA Center™. You will learn how to use the Cisco Catalyst 9000 family of switches to enable Software Defined Access (SD-Access) and provide end-to-end security and automation with centralized management using Cisco DNA Center.
3.0 ngày

ENARSI - Implementing Cisco Enterprise Advanced Routing and Services v1.0

The Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) v1.0 certification & training course gives you the knowledge you need to install, configure, operate, and troubleshoot an enterprise network. This course covers advanced routing and infrastructure technologies, expanding on the topics covered in the Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) v1.0 course.
5.0 ngày

DNAAS - Leveraging Cisco Intent-Based Networking DNA Assurance v2.0

The Leveraging Cisco Intent-Based Networking DNA Assurance (DNAAS) v2.0 course provides you with the skills to monitor and troubleshoot a traditional brownfield network infrastructure by using Cisco® Digital Network Architecture (Cisco DNA™) Assurance. The course focuses on highlighting issues rather than on monitoring data. The advanced artificial intelligence and machine learning features within Cisco DNA Assurance enable you to isolate the root cause of a problem and to take appropriate actions to quickly resolve issues. Cisco DNA Assurance can be used to perform the work of a Level 3 support engineer.
3.0 ngày

ENCOR - Implementing and Operating Cisco Enterprise Network Core Technologies v1.2

The Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) v1.2 course gives you the knowledge and skills needed to configure, troubleshoot, and manage enterprise wired and wireless networks. You’ll also learn to implement security principles, implement automation and programmability within an enterprise network, and how to overlay network design by using SD-Access and SD-WAN solutions.
5.0 ngày

WLFNDU - Understanding Cisco Wireless Foundations v1.0

The Understanding Cisco Wireless Foundations (WLFNDU) v1.0 course gives you the knowledge and skills you need to position, plan, implement, operate, and manage a Cisco® wireless LAN (WLAN) network. This certification & training course teaches you how to design, install, configure, monitor, and conduct basic troubleshooting tasks on a Cisco WLAN network of any size.
5.0 ngày

CCNA - Implementing and Administering Cisco Solutions v1.0

The Implementing and Administering Cisco Solutions (CCNA) v1.0 course gives you a broad range of fundamental knowledge for all IT careers. Through a combination of lecture and hands-on labs, you will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. This certification & training course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking.
5.0 ngày

BTROAD - Building Cisco Business Outcome-Aligned IT Roadmaps v1.0

The course is divided into a series of focused modules that will enable learners to build knowledge, understanding, and confidence in the skills, capabilities, and frameworks that they will need to develop across their teams to engage and present in an architecturally aligned approach. The course is designed to help learners understand the business and technology drivers that necessitate the transition from products and solutions to an architectural approach and how this will require the fundamental change of their approach. The course also presents and utilizes a methodology that attendees can use to engage architecturally with their customers and create a unique architecture roadmap tied to the business strategies and objectives of the customers. Each of the modules focuses on specific areas that, when combined, will provide the basis for the development toward architecturally focused engagements.
5.0 ngày

DEVCOR - Developing Applications Using Cisco Core Platforms and APIs v1.0

The Developing Applications using Cisco Core Platforms and APIs (DEVCOR) v1.0 certification & training course helps you prepare for Cisco DevNet Professional certification and for professional-level network automation engineer roles. You will learn how to implement network applications using Cisco® platforms as a base, from initial software design to diverse system integration, as well as testing and deployment automation. The course gives you hands-on experience solving real world problems using Cisco Application Programming Interfaces (APIs) and modern development tools. This course helps you prepare to take the 350-901 Developing Applications using Cisco Core Platforms and APIs (DEVCOR) exam. By passing this exam, you satisfy the core exam requirement toward Cisco Certified DevNet Professional and you earn the Cisco Certified DevNet Specialist Core certification.
5.0 ngày

DEVIOT - Developing Solutions Using Cisco IoT and Edge Platforms v1.0

The Developing Solutions Using Cisco IoT and Edge Platforms (DEVIOT) v1.0 certification & training course prepares you to develop Internet of Things (IoT) applications for Cisco® IoT edge compute and network architecture. Through a combination of lessons and hands-on experience, you will learn to implement and deploy Cisco IOx applications using Cisco Field Network Director and Cisco Kinetic. This course covers designing, deploying, and troubleshooting edge applications, and understanding the use of management tools, so you can control your industrial network and connected devices at scale.
5.0 ngày

DEVASC - Developing Applications and Automating Workflows using Cisco Platforms (DEVASC) v1.0

The Developing Applications and Automating Workflows Using Cisco Platforms (DEVASC) v1.0 course helps you prepare for Cisco® DevNet Associate certification and for associate-level network automation engineer roles. You will learn how to implement basic network applications using Cisco platforms as a base, and how to implement automation workflows across network, security, collaboration, and computing infrastructure. The course gives you hands-on experience solving real world problems using Cisco Application Programming Interfaces (APIs) and modern development tools.
5.0 ngày

SPAUI - Implementing Automation for Cisco Service Provider Solutions v1.0

The Implementing Cisco Service Provider Automation Solutions (SPAUI) v1.0 course prepares you to implement and support automation solutions in Service Provider network infrastructure, using network programmability principles, protocols, tools, and mechanisms. Through a combination of lessons and hands-on labs, you will learn to deploy, configure, monitor, and operate Service Provider network environments using modern data models. These models allow you to represent operational data and new network management protocols in order to administer hundreds or thousands of devices in a single operation, replacing traditional, time-consuming, error prone, device-by-device command line interface (CLI) management.
3.0 ngày

SAUI - Implementing Automation for Cisco Security Solutions v1.0

The Implementing Automation for Cisco Security Solutions (SAUI) v1.0 certification & training  course teaches you how to design advanced automated security solutions for your network. Through a combination of lessons and hands-on labs, you will master the use of modern programming concepts, RESTful application program interfaces (APIs), data models, protocols, firewalls, web, Domain Name System (DNS), cloud, email security, and Cisco® Identity Services Engine (ISE) to strengthen cybersecurity for your web services, network, and devices. You will learn to work within the following platforms: Cisco Firepower® Management Center, Cisco Firepower Threat Defense, Cisco ISE, Cisco pxGrid, Cisco Stealthwatch® Enterprise, Cisco Stealthwatch Cloud, Cisco Umbrella®, Cisco Advanced Malware Protection (AMP), Cisco Threat grid, and Cisco Security Management Appliances. This course will teach you when to use the API for each Cisco security solution to drive network efficiency and reduce complexity.
3.0 ngày

ENAUI - Implementing Automation for Cisco Enterprise Solutions v1.2

This certification & training course teaches you how to implement Cisco Enterprise automated solutions, including programming concepts, orchestration, telemetry, and automation tools. This course highlights the tools and the benefits of leveraging programmability and automation in the Cisco-powered Enterprise Campus and WAN. You will also examine platforms including IOS XE software for device-centric automation, Cisco DNA Center for the intent-based enterprise network, Cisco Software-Defined WAN, and Cisco Meraki. Their current ecosystem of APIs, software development toolkits, and relevant workflows are studied in detail together with open industry standards, tools, and APIs, such as Python, Ansible, Git, JSON/YAML, NETCONF/RESTCONF, and YANG. This course also earns you 24 Continuing Education (CE) credits towards recertification.
3.0 ngày

DEVOPS - Implementing DevOps Solutions and Practices Using Cisco Platforms v1.0

The Implementing DevOps Solutions and Practices Using Cisco Platforms (DEVOPS) v1.0 course teaches you how to automate application deployment, enable automated configuration, enhance management, and improve scalability of cloud microservices and infrastructure processes on Cisco® platforms. You will also learn how to integrate Docker and Kubernetes to create advanced capabilities and flexibility in application deployment.
5.0 ngày

DCNXA - Implementing Cisco Nexus 9000 Switches in NX-OS Mode – Advanced v1.0

The Implementing Cisco Nexus 9000 Switches in NX-OS Mode – Advanced (DCNXA) v1.0 certification & training course provides advanced training in applying and managing the Cisco Nexus® 9000 Series Switches in NX-OS mode. The Cisco® NX-OS platform deploys Virtual Extensible LAN (VXLAN) and Ethernet VPN (EVPN) using Cisco Data Center Network Manager (DCNM), implements Multi-Site VXLAN EVPN, and integrates L4-L7 services into the fabric providing external connectivity, utilizing advanced tenant features. You will also learn how to implement Cisco NX-OS Enhanced Policy-Based Redirect (ePBR) and Intelligent Traffic Director (ITD) features.
4.0 ngày

DCNX - Implementing Cisco NX-OS Switches and Fabrics in the Data Center v1.0

The Implementing Cisco NX-OS Switches and Fabrics in the Data Center (DCNX) v1.0 certification & training course gives you a detailed understanding of the Cisco® Nexus switch platform and teach you how to install, configure, and manage Cisco Nexus® switch platforms in a scalable, highly available environment. Through a combination of lectures and hands-on labs, you will learn how to describe various aspects of the Cisco Nexus product families and platforms, including implementation, management, security, programmability and storage. Additionally, you will learn how to configure device aliases and zoning, Fibre Channel over Ethernet (FCoE), and N-Port Identifier Virtualization (NPIV), and N-Port Virtualization (NPV) modes.
5.0 ngày

DCACIA - Implementing Cisco Application Centric Infrastructure–Advanced v1.0

The Implementing Cisco Application Centric Infrastructure–Advanced (DCACIA) v1.0 certification & training course shows you how to integrate the capabilities of the Cisco® Nexus® 9000 Series Switches in Cisco Application Centric Infrastructure (Cisco ACI®) mode. You will learn how to configure and manage Cisco Nexus 9000 Series Switches in ACI mode providing enhanced management and policy framework, along with the protocols used in the underlying fabric. The course also covers how to use Cisco ACI as a policy-driven solution that integrates software and hardware, and how to implement Cisco ACI Multi-Pod and Multi-Site deployments. You will gain hands-on practice implementing advanced ACI capabilities such as Rogue Endpoint Feature, Transit Routing, VRF Route Leaking, Contracts and Zoning Rules, Policy Based Redirect to Layer 4–7 Service Node, Multi-Pod Fabric and Cisco ACI®Multi-Site Orchestrator.
5.0 ngày

DCIHX - Implementing Cisco HyperFlex 1.3

The Implementing Cisco HyperFlex (DCIHX) v1.3 course shows you how to deploy and use the Cisco® HyperFlex™ data platform to support multicloud workloads. You will become familiar with HyperFlex components and learn how to install, design, manage, and troubleshoot Cisco HyperFlex to support highly scalable and resilient multicloud implementations. You will also gain hands-on experience focused on installation, management, maintenance, and native replication, and you will explore cluster technologies as well as Cisco Intersight.
4.0 ngày

DCIUCS - Introducing Cisco Unified Computing System v1.0

The Introducing Cisco Unified Computing System (DCIUCS) v1.0 is an introductory course that shows you how to deploy, secure, operate, and maintain the Cisco Unified Computing system (Cisco UCS®) B-Series blade servers, Cisco UCS C-Series and S-Series rack servers, and Cisco HyperFlex™ product family for use in data centers. You will gain hands-on practice on basic Cisco UCS server configuration, performing backup and restore activities, and more.
2.0 ngày

DCAUI - Implementing Automation for Cisco Data Center Solutions v1.1

The Implementing Automation for Cisco Data Center Solutions (DCAUI) v1.1 course teaches you how to implement Cisco® Data Center automated solutions including programming concepts, orchestration, and automation tools. Through a combination of lessons and hands-on practice, you will manage the tools and learn the benefits of programmability and automation in the Cisco-powered Data Center. You will examine Cisco Application Centric Infrastructure (Cisco ACI®), Software-Defined Networking (SDN) for data center and cloud networks, Cisco Nexus® (Cisco NX-OS) platforms for device-centric automation, and Cisco Unified Computing System (Cisco UCS®) for Data Center compute. You will study their current ecosystem of Application Programming Interfaces (APIs), software development toolkits, and relevant workflows along with open industry standards, tools, and APIs, such as Python, Ansible, Git, JavaScript Object Notation (JSON), Yaml Ain't Markup Language (YAML), Network Configuration Protocol (NETCONF), Representational State Transfer Configuration Protocol (RESTCONF), and Yet Another Generation (YANG).
3.0 ngày

DCCUCS - Configuring Cisco Unified Computing System v1.0

The Configuring Cisco Unified Computing System (DCCUCS) v1.0 certification & training course shows you how to deploy, secure, operate, and maintain Cisco Unified Computing System™ (Cisco UCS®) B-series blade servers, Cisco UCS C-Series, and S-Series rack servers for use in data centers. You will learn how to implement management and orchestration software for Cisco UCS. You will gain hands-on practice: configuring key features of Cisco UCS, Cisco UCS Director, and Cisco UCS Manager; implementing UCS management software including Cisco UCS Manager and Cisco Intersight™ and more.
3.0 ngày

UCSDACI - Designing and Deploying Cisco UCS Director with ACI v6.6

The Designing and Deploying Cisco UCS Director with ACI (UCSDACI) v6.6 certification & training course shows you how to use Cisco UCS® Director software to manage physical and virtual infrastructure elements, including Cisco Application Centric Infrastructure (Cisco ACI™). You will learn to use orchestration and automation functions of Cisco UCS Director to effectively manage infrastructure and automate IT processes. The course offers hands-on experience installing and configuring Cisco UCS Director software. You will also learn about features such as bare-metal provisioning; compute, network, and storage management; orchestration, including Application Policy Infrastructure Controller (APIC); Cisco UCS Director custom tasks, and more.
1.0 ngày

DCMDSO - Cisco MDS9000 Series Switches Overview v1.5

The Cisco MDS 9000 Series Switches Overview (DCMDSO) v1.5 course gives you a technical overview of how Cisco Multilayer Director Switch (MDS) 9000 Series, can be used to build highly available and scalable storage networks with advanced security and unified management. The course is for technical decision makers and IT professionals who architect, implement, and manage data center Storage Area Network (SAN) environments. In this course, you’ll learn about key capabilities of the MDS 9000 Series, including platforms, architecture, software, management, and key features that contribute to performance, high availability, flexibility, and operational simplicity of storage environments
1.0 ngày

DCID - Designing Cisco Data Center Infrastructure v7.0

The Designing Cisco Data Center Infrastructure (DCID) v7.0 certification & training course helps you master design and deployment options focused on Cisco® data center solutions and technologies across network, compute, virtualization, storage area networks, automation, and security. You will learn design practices for the Cisco Unified Computing System™ (Cisco UCS®) solution based on Cisco UCS B-Series and C-Series servers, Cisco UCS Manager, and Cisco Unified Fabric. You will also gain design experience with network management technologies including Cisco UCS Manager, Cisco Data Center Network Manager (DCNM), and Cisco UCS Director. You can expect theoretical content as well as design-oriented case studies in the form of activities.
5.0 ngày

DCIT - Troubleshooting Cisco Data Center Infrastructure v7.0

The Troubleshooting Cisco Data Center Infrastructure (DCIT) v7.0 certification & training course shows you how to troubleshoot LAN, SAN, Cisco Data Center Unified Fabric, Cisco Unified Computing System (UCS), and Cisco Application-Centric Infrastructure (ACI). You will learn methodologies and tools to identify issues that may occur in data center network architecture. You will get extensive hands-on practice troubleshooting installation, configuration and interconnectivity issues on Cisco MDS switches, Cisco Nexus switches, Cisco Fabric Extenders (FEXs), Cisco UCS, Cisco ACI, and more.
5.0 ngày

VSIMP - Implementing the VersaStack Solution v1.0

Implementing the VersaStackTM Solution is a 3-day instructor led and e-learning, hands-on course focused on 80% lab activities and 20% direct instruction for field engineers. This course enables engineers to deploy and support a VersaStack system using methods and procedures defined in the Cisco Validated Design. Infrastructure covered includes Cisco Nexus 9000 switches, Cisco MDS switches, Cisco UCS, VMware, Cisco UCS Director Virtual Machine, and IBM Storwize Storage System.
3.0 ngày

UCSDF - Cisco UCS Director Foundation v6.6

The Cisco UCS Director Foundation (UCSDF) v6.6 certification & training course helps you understand concepts, architecture, and deployment use cases for Cisco UCS® Director. You will gain hands-on experience in deploying basic Cisco UCS Director solutions. You will also practice using core features that most implementations require, such as services design, using the self-service portal for provisioning services, creating workflows that enable cloud automation and standardize IT services, and more.
3.0 ngày

DCFNDU - Understanding Cisco Data Center Foundations v1.1

The Understanding Cisco Data Center Foundations (DCFNDU) v1.1 course helps you prepare for entry-level data center roles. In this course, you will learn the foundational knowledge and skills you need to configure Cisco® data center technologies including networking, virtualization, storage area networking, and unified computing. You will get an introduction to Cisco Application Centric Infrastructure (Cisco ACI), automation and cloud computing. You will get hands-on experience with configuring features on Cisco Nexus Operating System (Cisco NX-OS) and Cisco Unified Computing System (Cisco UCS). This course does not lead directly to a certification exam, but it does cover foundational knowledge that can help you prepare for several CCNP and other professional-level data center courses and exams.
5.0 ngày

DCCOR - Implementing and Operating Cisco Data Center Core Technologies v1.1

The Implementing and Operating Cisco Data Center Core Technologies (DCCOR) v1.1 course helps you prepare for the Cisco® CCNP® Data Center and CCIE® Data Center certifications for advanced-level data center roles. In this course, you will master the skills and technologies you need to implement data center compute, LAN and SAN infrastructure. You will also learn the essentials of automation and security in data centers. You will gain hands-on experience deploying, securing, operating, and maintaining Cisco data center infrastructure including: Cisco MDS Switches and Cisco Nexus Switches; Cisco Unified Computing System™ (Cisco UCS®) B-Series Blade Servers, and Cisco UCS C-Series Rack Servers. This course also earns you 64 Continuing Education (CE) credits towards recertification.
5.0 ngày

DCACI - Implementing Cisco Application Centric Infrastructure v1.1

The Implementing Cisco Application Centric Infrastructure (DCACI) v1.1 course shows you how to deploy and manage the Cisco® Nexus® 9000 Series Switches in Cisco Application Centric Infrastructure (Cisco ACI®) mode. You will learn how to configure and manage Cisco Nexus 9000 Series Switches in ACI mode, how to connect the Cisco ACI fabric to external networks and services, and the fundamentals of Virtual Machine Manager (VMM) integration. You will gain hands-on practice implementing key capabilities such as fabric discovery, policies, connectivity, VMM integration, and more.
5.0 ngày

CBRCOR - Performing CyberOps Using Cisco Security Technologies v1.0

The Performing CyberOps Using Cisco Security Technologies (CBRCOR) v1.0 course covers cybersecurity operations fundamentals, methods, and automation. The knowledge you gain in this course will prepare you for the role of Information Security Analyst on a Security Operations Center (SOC) team. In this certification & training course you will learn foundational concepts and their application in real-world scenarios, and how to leverage playbooks in formulating an Incident Response (IR). The course shows you how to use automation for security using cloud platforms and a SecDevOps methodology. You will learn the techniques for detecting cyberattacks, analyzing threats, and making appropriate recommendations to improve cybersecurity. This course also earns you 30 Continuing Education (CE) credits towards recertification.
5.0 ngày

CBROPS - Understanding Cisco Cybersecurity Operations Fundamentals v1.0

This certification & training course teaches you security concepts, common network and application operations and attacks, and the types of data needed to investigate security incidents. This course teaches you how to monitor alerts and breaches, and how to understand and follow established procedures for response to alerts converted to incidents. Through a combination of lecture, hands-on labs, and self-study, you will learn the essential skills, concepts, and technologies to be a contributing member of a cybersecurity operations center (SOC) including understanding the IT infrastructure, operations, and vulnerabilities. This course helps you prepare for the Cisco Certified CyberOps Associate certification and the role of a Junior or Entry-level cybersecurity operations analyst in a SOC.
5.0 ngày

AUCCE2 - Administering Cisco Unified Contact Center Enterprise v2.0, Part 2

Administering Cisco Unified Contact Center Enterprise Part 2 (AUCCE Part 2) is a 5 day instructor-led course presented by training partners to system engineers and customers who will be involved with day 2 support of a UCCE solution deployed in a CVP comprehensive environment. This course gives the learner an understanding of the requirements, resources and tools required to perform complex adds, moves and changes in the inbound / outbound UCCE environment. This course is intended for those performing advanced administration of the solution, or who may be responsible for Level 2-3 support of the solution. The overall goal of this course is advanced administration of the solution by a deeper exposure into the technical operational requirements and the tools used to configure and ensure functionality
5.0 ngày

UCCXD - Deploying Cisco Unified Contact Center Express v6.0

This course is designed for systems engineers who will be responsible for deploying the Cisco Unified Contact Center Express (Unified CCX) and Cisco Unified IP Interactive Voice Response (Unified IP IVR) products.
5.0 ngày

AUCCE1 - Administering Cisco Unified Contact Center Enterprise v2.0, Part 1

The Administering Cisco Unified Contact Center Enterprise Part 1 is a 5 day instructor-led certification & training course presented by training partners to system engineers and customers who will be involved with Day 2 support of a UCCE solution deployed in a CVP comprehensive environment. This course describes the requirements, resources and tools needed to perform routine adds, moves and changes in the inbound / outbound UCCE environment. This course is intended for those administering the solution, or who may be responsible for Level 1-2 support of the solution
5.0 ngày

CLCNF - Implementing Cisco Collaboration Conferencing v1.0

The Implementing Cisco Collaboration Conferencing (CLCNF) v1.0 course focuses on Cisco® on-premises conferencing architecture and solutions. In this certification & training course you will gain knowledge and skills to design and implement common conferencing deployment scenarios of Cisco Meeting Server, its integration with call control features such as Cisco Unified Communications Manager and Cisco Expressway, and other Cisco collaboration conferencing devices.
5.0 ngày

CSAU - Introducing Automation for Cisco Solutions 1.1

The Introducing Automation for Cisco Solutions (CSAU) v1.1 course gives you a broad overview of network automation skills. Through a combination of lecture and hands-on labs, you will learn the fundamentals of automation such as working on model-driven programmability solutions with Representational State Transfer Configuration Protocol (RESTCONF) and Network Configuration Protocol (NETCONF) protocols. The course also covers data formats and types, including Extensible Markup Language (XML), JavaScript Object Notation (JSON), Yaml Ain’t Markup Language (YAML), and Yet Another Next Generation (YANG), and their value in network automation, along with DevOps tools such as Ansible and Git.
2.0 ngày

CLAUI - Implementing Automation for Cisco Collaboration Solutions v1.0

The Implementing Automation for Cisco Collaboration Solutions (CLAUI) v1.0 certification & training course teaches you how to implement Cisco® Collaboration automated, programmable solutions for voice, video, collaboration, and conferencing on-premises or in the cloud. Through a combination of lessons and hands-on labs, you will combine tools and processes to tackle communication challenges using key platforms including Cisco Unified Communications Manager, Cisco IP Phone Services, Cisco Unity® Connection, Cisco Finesse®, Cisco Collaboration Endpoints, Cisco Webex Teams™, and Cisco Webex® Meetings. You will also learn how to use Application Programming Interfaces (APIs) interfaces such as Representational State Transfer (REST) and Simple Object Access Protocol (SOAP), parsing data in Extensible Markup Language (XML) and JavaScript Object Notation (JSON) formats, and leverage frameworks such as Python.
3.0 ngày

CLCEI - Implementing Cisco Collaboration Cloud and Edge Solutions v1.0

The Implementing Cisco Collaboration Cloud and Edge Solutions (CLCEI) v1.0 certification & training course provides you with knowledge about Cisco® Expressway Series solutions enabling business-to-business (B2B) calls, Cisco Mobile, remote access, authentication options, and additional Cisco Expressway Series features. Though a combination of lessons and hands-on labs, you will learn how to leverage collaborative technology to access secure, collaborative work supports including video, voice, content, and remote workloads.
5.0 ngày

CLACCM - Implementing Cisco Advanced Call Control and Mobility Services v1.0

The Implementing Cisco Advanced Call Control and Mobility Services (CLACCM) v1.0 certification & training course covers advanced call control and mobility services. You will learn how to use Cisco® Unified Communications Manager features to consolidate your communications infrastructure into a scalable, portable, and secure collaboration solution.
5.0 ngày

CLICA - Implementing Cisco Collaboration Applications v1.0

The Implementing Cisco Collaboration Applications (CLICA) v1.0 certification & training course shows you how to implement Single Sign-On (SSO), Cisco Unified IM and Presence, Cisco Unity Connection, and Cisco Unity Express. You will learn how to streamline communication procedures, strengthen compliance measures, and enhance your communication systems and devices. This course also earns you 40 Continuing Education (CE) credits towards recertification.
5.0 ngày

CLCOR - Implementing and Operating Cisco Collaboration Core Technologies v1.1

This certification & Training course Implementing and Operating Cisco Collaboration Core Technologies (CLCOR) v1.1 course helps you prepare for advanced-level roles focused on implementation and operation of Cisco collaboration solutions. You will gain the knowledge and skills needed to implement and deploy core collaboration and networking technologies, including infrastructure and design, protocols, codecs, and endpoints, Cisco Internetwork Operating System (IOS®) XE gateway and media resources, call control, Quality of Service (QoS), and additional Cisco collaboration applications.
5.0 ngày

CLFNDU - Understanding Cisco Collaboration Foundations v1.1

The Understanding Cisco Collaboration Foundations (CLFNDU) v1.1 course gives you the skills and knowledge needed to administer and support a simple, single-site Cisco® Unified Communications Manager (CM) solution with Session Initiation Protocol (SIP) gateway. The course covers initial parameters, management of devices including phones and video endpoints, management of users, and management of media resources, as well as Cisco Unified Communications solutions maintenance and troubleshooting tools. In addition, you will learn the basics of SIP dial plans including connectivity to Public Switched Telephone Network (PSTN) services, and how to use class-of-service capabilities. This course does not lead directly to a certification exam, but it does cover foundational knowledge that can help you prepare for several professional-level collaboration courses and exams:

ACUCM - Administering Cisco Unified Communications Manager v11.5

Administering Cisco Unified Communications Manager (ACUCM) provides you with an understanding of the Cisco Unified Communications Manager System. This course teaches the concepts of IP telephony based in system administration, including its function, features, and configuration. This is an entry-level course that begins with the basic concepts of IP telephony and very quickly moves you forward into an understanding of system concepts: clustering, creation of phones and users, route plans, digit manipulation, media resources, and phone features, which are all important to supporting IP telephony in the enterprise network. The course focuses on Cisco Unified Communications Manager version
3.0 ngày

VII - Cisco Video Infrastructure Implementation v1.0

This certification & training course will provide you with the necessary knowledge and skills to implement a complete Cisco TelePresence solution, including TelePresence endpoints, integration of premise with cloud solutions, meeting solutions, and management software. It describes Cisco business TelePresence solutions and enables students to implement and troubleshoot basic and advanced TelePresence network solutions.
5.0 ngày

QOS - Implementing Cisco Quality of Service v2.5

Implementing Cisco Quality of Service (QoS) v2.5 provides learners with in-depth knowledge of quality of service (QoS) requirements; conceptual models such as Best-Effort, Integrated Services (IntServ), and Differentiated Services (DiffServ); and the implementation of QoS on Cisco IOS platforms. The curriculum covers the theory of QoS, design issues, and configuration of various QoS mechanisms to facilitate the creation of effective QoS administrative policies. Case studies and lab activities included in the course help learners apply the concepts that are mastered in individual modules to real-life scenarios. The course also gives learners design and usage rules for various advanced QoS features and for the integration of QoS with underlying Layer 2 QoS mechanisms, allowing the learners to design and implement efficient, optimal, and trouble-free multiservice networks.

UEIME - Implementing Cisco Unified E-Mail and Web Interaction Manager Enterprise v2.0

A complete technical installation, configuration and integration course for Cisco Unified EIM and WIM and Unified CCE. The course is for sales engineers, installers, consultants, application support staff and IT personnel who will be able to perform all aspects of the installation and maintenance of the Cisco Unified EIM and WIM applications.
5.0 ngày

DUIC - Deploying Cisco Unified Intelligence Center v1.1

The Deploying Cisco Unified Intelligence Center (DUIC) v1.1 course is a three-day instructor-led training (ILT) course. Cisco Unified Intelligence Center 8.0.4 is a comprehensive, end-to-end reporting solution, designed to make the task of creating reports and managing disparate data sources easier on the customer and, at the same time, to present a consistent user interface and a common tool to access varied data across multiple Cisco product families.
3.0 ngày

UCSEC - Implementing Cisco Unified Communications Security v1.0

Implementing Cisco Unified Communications Security (UCSEC) v1.0 is a new five-days ILT certification & training course that is designed to provide students with the necessary knowledge and skills to implement security features in a Cisco Unified Communications environment. Cisco Unified Communications support several features and mechanisms to secure voice signaling and communications and to mitigate attacks against Cisco Unified Communications networks. The Implementing Cisco Unified Communications Security (UCSEC) v1.0 course introduces security mechanisms and describes different implementation scenarios that increase the security level of Cisco Unified Communications networks.
5.0 ngày

SECCLD - Securing Cloud Deployments with Cisco Technologies v1.0

The Securing Cloud Deployments with Cisco Technologies (SECCLD) v1.0 certification & training course shows you how to implement Cisco® cloud security solutions to secure access to the cloud, workloads in the cloud, and software as a service (SaaS) user accounts, applications, and data. Through expert instruction and hands-on labs, you’ll learn a comprehensive set of skills and technologies including how to use key Cisco cloud security solutions; detect suspicious traffic flows, policy violations, and compromised devices; implement security controls for cloud environments, and implement cloud security management. This course covers usage of Cisco Cloudlock, Cisco Umbrella™, Cisco Cloud Email Security, Cisco Advanced Malware Protection (AMP) for Endpoints, Cisco Stealthwatch® Cloud and Enterprise, Cisco Firepower® NGFW (next-generation firewall), and more.
4.0 ngày

SECICC - Introducing Cisco Cloud Consumer Security v1.0

The Introducing Cisco Cloud Consumer Security (SECICC) v1.0 course gives you a technical overview of basic concepts and components of the cloud, and the Cisco® solutions used to provide comprehensive security of your cloud-based environment. In this primarily lecture-based course, you’ll learn the basics from a cloud consumer perspective including securing cloud and software as a service (SaaS) application environments. This introductory course provides insights on using Cisco Stealthwatch™ Cloud, Cisco CloudLock, Cisco Umbrella™ and more to protect the user when using cloud-based applications.
1.0 ngày

DDCMS15 - Deep Dive Cisco Meeting Server v1.5

This 3-days workshop provides an in depth understanding of Cisco Meeting Server solution. Participants will have opportunity to understand how Cisco meeting server address needs of modern work space with its features. Cisco Meeting Server helps ensure that everyone gets a consistent, familiar meeting experience, whether they’re joining a meeting using Cisco or third-party video endpoints, a Cisco Jabber client, Cisco Meeting App (native or via a Web RTC-compatible browser),or Skype for Business.
3.0 ngày

DCMDS - Configuring Cisco MDS 9000 Series Switches v3.6

The DCMDS course is part of Cisco Black Belt Academy Aligned Content. It belongs to the stages: Black Belt MDS Deployment Stage-2 and Black Belt Support Stage-2. The Configuring Cisco MDS 9000 Series Switches (DCMDS) v3.6 course teaches you to implement, manage, and troubleshoot Cisco® MDS 9000 Series Switches to build highly available, scalable storage networks. Through expert instruction and extensive hands-on practice, you will learn how to deploy and utilize capabilities such as Virtual Storage Area Networks (VSANs), Role-Based Access Control (RBAC), N-Port Virtualization (NPV) fabric security, zoning, automation with NX-API, Slow Drain Analysis, SAN analytics, Fibre Channel over TCP/IP (FCIP) tunnels, and more. You will learn how to configure and implement platform features and learn troubleshooting techniques pertaining to Fibre Channel (FC) domains, firmware upgrades, zones, and zone mergers. 
4.0 ngày

Cơ hội nhận ưu đãi học phí lên tới 60%

Trainocate - Đối tác đào tạo ủy quyền của hơn 30 hãng công nghệ hàng đầu thế giới
Ngày
00
Giờ
0
Phút
0
Giây
0

Đăng ký tư vấn
cùng đội ngũ chuyên gia Trainocate!!

Bản quyền thuộc về Trainocate Việt Nam

back to top
icon đăng ký